25
TV operation
Press MENU in the TV mode, then press or
to select SETUP menu.
Press or to select “TV/CABLE”.
1
2
Press
or
to select “TV” or “CABLE”.
3TV - VHF/UHF channels
CABLE - Cable TV channels
TV/CABLE selection
To memorize channels
This unit is equipped with a channel memory feature which allows
channels to skip up or down to the next channel set into memory,
skipping over unwanted channels. Before selecting channels, they
must be programmed into the unit’s memory. To use this unit with an
antenna, set the TV/CABLE selection to the TV position. When
shipped from the factory, this selection is in the CABLE position.
To ADD/ERASE channels
Press MENU in the TV mode, then press or to
select SETUP menu. Press or to select the
“CH PROGRAM”, then press .
The TV will begin memorizing all the
channels available in your area.
Automatic memory tuning
Press or to select the channel you want
and then press or to select “ADD” or
“ERASE”.
3
MENU
/ / /
Press MENU in the TV mode, then press or
to select SETUP menu.
Press or to select “ADD/ERASE”.
Repeat steps 3 for other channel you want to
add or erase.
4
RETURN
SETUP
LANGUAGE
CLOCK SET
TV / CABLE
CH PROGRAM
ADD / ERASE
ENGLISH
CABLE
:SELECT :ADJUST
RETURN:ENDRETURN:END