69
Others
The remote control is not aimed at the
sensor.
Distance is too far or too much light in the
room.
There is an obstacle in the path of the
beam.
The batteries are weak.
The batteries are not inserted correctly.
Remote control does not
operate.
Aim the remote control at the remote
sensor.
Operate within 5 m or reduce the light
of the room.
Clear the path of the beam.
Replace the batteries.
Insert correctly.
SYMPTOMS CAUSE POSSIBLE SOLUTIONSPAGEREMOTE CONTROLDVD
The playback picture has
occasional distortion.
The disc is dirty.
It is in fast forward or fast reverse
playback.
No disc is inserted.
An unplayable disc is inserted.
The disc is placed upside down.
The disc is not placed within the guide.
The parental lock function is set.
It is in the mode of repeat playback,
memory playback, etc.
The function is prohibited with the unit or
the disc.
Eject the disc and clean it.
Some times a small amount of picture
distortion may appear. This is not a
malfunction.
Insert a disc.
Insert a playable disc (Check the disc
type and color system).
Place the disc with the playback side
down.
Place the disc correctly inside the
guide on the disc tray.
Cancel the parental lock function or
change the parental lock level.
These operations may prevent a
proper progress of the contents.
The unit does not start
playback.
Playback does not follow the
course of the disc’s program.
“ ” appears on the screen.
8
–
44
9
44
44
64, 65
–
12
12
12
12
12
9
–
5V80101A [E]p66-70 2/22/06, 1:19 PM69