Introduction

IMPORTANT SAFEGUARDS

13.LIGHTNING

To protect your unit from a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the unit due to lightning and power line surges.

14.POWER LINES

An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall onto or against such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits, as contact with them might be fatal.

15.OVERLOADING

Do not overload wall outlets and extension cords, as this can result in a risk of fire or electric shock.

16.OBJECT AND LIQUID ENTRY

Do not push objects through any openings in this unit, as they may touch dangerous voltage points or short out parts that could result in fire or electric shock. Never spill or spray any type of liquid into the unit.

17.OUTDOOR ANTENNA GROUNDING

If an outside antenna or cable system is connected to the unit, be sure the antenna or cable system is grounded to provide some protection against voltage surges and built-up static charges, Section 810 of the National Electrical Code (NEC), ANSI/NFPA 70, provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna discharge unit, connection to grounding electrodes, and requirements for the grounding electrode.

18.SERVICING

Do not attempt to service this unit yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.

For example:

a.When the power-supply cord or plug is damaged.

b.If liquid has been spilled, or objects have fallen into the unit.

c.If the unit has been exposed to rain or water.

d.If the unit does not operate normally by following the operating instructions. Adjust only those

controls that are covered by the operating instructions, as an improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the

unit to its normal operation.

e.If the unit has been dropped or the cabinet has been damaged.

f.When the unit exhibits a distinct change in performance, this indicates a need for service.

19.REPLACEMENT PARTS

When replacement parts are required, be sure the service technician uses replacement parts specified by the manufacturer or those that have the same characteristics as the original part.

Unauthorized substitutions may result in fire, electric shock or other hazards.

20.SAFETY CHECK

Upon completion of any service or repairs to this unit, ask the service technician to perform safety checks to determine that the unit is in proper operating condition.

21.HEAT

The product should be situated away from heat sources such as radiators, heat registers, stoves, or other products (including amplifiers) that produce heat.

22.DISC TRAY

Keep your fingers well clear of the disc tray as it is closing. It may cause serious personal injury.

23.CONNECTING

When you connect the product to other equipment, turn off the power and unplug all of the equipment from the wall outlet. Failure to do so may cause an electric shock and serious personal injury. Read the owner's manual of the other equipment carefully and follow the instructions when making any connections.

24.SOUND VOLUME

Reduce the volume to the minimum level before you turn on the product. Otherwise, sudden high volume sound may cause hearing or speaker damage.

25.SOUND DISTORTION

Do not allow the product output distorted sound for a longtime. It may cause speaker overheating and fire.

26.HEADPHONES

When you use the headphones, keep the volume at a moderate level. If you use the headphones continu-

4

ously with high volume sound, it may cause hearing damage.

 

5T80101B [E]p02-05

4

3/8/05, 9:54 AM

Page 4
Image 4
Toshiba MW20F51, MW24F51, MW27F51 owner manual Important Safeguards, Heat

MW20F51, MW24F51, MW27F51 specifications

The Toshiba MW27F51, MW24F51, and MW20F51 are part of Toshiba's popular line of combination microwave ovens that blend modern technology with practical design, making them ideal for contemporary kitchens. These models are characterized by their functionality, user-friendly features, and innovative cooking technology, offering versatile options for preparing a variety of meals with ease.

Starting with the MW27F51, this model boasts a generous 2.7 cubic feet capacity, allowing users to cook larger dishes without hassle. It features a sleek design with a stainless-steel finish, adding an aesthetic appeal to kitchen spaces. The MW27F51 is equipped with advanced inverter technology, which provides a steady stream of power for precise cooking. This ensures that food is evenly heated, maintaining moisture in delicate dishes and enabling consumers to enjoy perfect results.

Next, the MW24F51 offers a slightly smaller capacity of 2.4 cubic feet but retains many of the performance characteristics of the MW27F51. This model also incorporates inverter cooking technology, allowing for better defrosting and reheating, minimizing the risk of uneven cooking. The MW24F51 comes with multiple cooking presets and sensor cooking functions that automatically adjust time and power levels based on the food type and weight, offering convenience for busy households.

The MW20F51 caters to those with limited kitchen space while still providing a spacious 2.0 cubic feet capacity. This model is lightweight and compact, making it easy to fit into various kitchen designs. It also includes a range of programmable options and pre-set cooking functions, providing fast and efficient meal preparation. The MW20F51 has an easy-to-read LED display and user-friendly controls, appealing to users who appreciate straightforward interfaces.

All these models prioritize safety with features like a child safety lock and automatic shut-off, ensuring peace of mind while cooking. They come with easy-to-clean interiors, further enhancing their practicality. Collectively, the Toshiba MW series stands out for its blend of innovation and user-centric design, making them a reliable choice for households looking to enhance their cooking experience. Whether preparing a quick meal or a family feast, these combination microwaves make versatility and efficiency effortless.