Toshiba MW27F51, MW24F51, MW20F51 Timer recording, Example, Speed as in step Then press Enter

Timer recording

Timer recording can be programmed on-screen with the remote control. The built-in timer allows automatic unattended recording of up to 8 programs within 1 month.

TV/VCR

ENTER

// /

MENU

TIMER REC

Timer recording

Preparation:

•Press TV/VCR to select the TV/VCR mode.

•Load a cassette tape with the erase prevention tab intact.

•Check the time and date are correct .

Example:

Program a timer recording for 23rd day, channel 125 (Cable TV), 7:00 - 9:30 PM (Tape speed : SLP).

1 Press MENU, then press or to select option.

TIMER REC SET
AUTO REPEAT	OFF

Set the start time, end time, channel and tape
5 speed as in step 4.	￿￿		￿￿￿
Then press ENTER.				￿￿￿￿￿￿￿
		￿￿￿￿￿￿			￿￿￿￿￿￿￿
	￿		￿	￿	￿￿￿￿￿￿￿￿￿￿￿￿
Notes:	￿￿￿￿			￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿
• Press to move cursor backward
for correction.
• To record from external source set
the channel to “L1” or “L2”.	￿		￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿

Recording

// / / MENU

Press or to select “TIMER REC SET”, then

6 To set the timer for another program, repeat

(VCR)

2 press .

￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿

steps 3 to 5 to set another program.

Press TIMER REC. The TIMER REC indicator

7 will light. The Timer is programed, when the programed time is reached, the recording is automatically started.

TIMER REC To cancel timer recording, press the button again and TIMER REC

3 Press or to select one of the program line, then press ENTER.

4 Press or to select the date, then press .

￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿

indicator will go out.

Notes:

•The VCR section cannot be used while the TIMER REC in- dicator is lit. If you want to use the VCR operation, press TIMER REC to deactivate the timer.

•When the clock is not set, you cannot select “TIMER REC”. In this case, set the clock (see pages 20~22).

•After a power failure or disconnection of the power plug,all programmed recording setting and time display will be lost upon resumption of power. In this case, reset the clock (see pages 20~22) and reprogram any timer recordings.

•If you want to correct the digits while setting, press or

until the item you want to correct, then press or to correct the desired setting.

•If programming is performed without a tape in the unit, or with a tape without an erase prevention tab, the Timer Re- cording is not possible. If a tape without an erase prevention tab is in the unit, the tape will be ejected.

41

5T80101B [E]p39-42 41 3/8/05, 9:57 AM