Connecting to an amplifier equipped with a MPEG audio decoder

MPEG2 sound

You can enjoy motion picture and live concert DVD video discs with dynamic realistic sound by connecting an amplifier equipped with an MPEG2 audio decoder or MPEG2 audio processor.

Amplifier equipped with an

 

MPEG2 audio decoder

 

To COAXIAL

 

type digital

To COAXIAL DIGITAL

audio input

AUDIO OUT

75 coaxial cable (not supplied)

Connections

Connecting to an amplifier equipped with a digital audio input

2 channel digital stereo

You can enjoy the dynamic sound of 2 channel digital stereo by connecting an amplifier equipped with a digital audio input and speaker system (right and left front speakers).

Amplifier equipped with a

 

Digital audio input

 

To COAXIAL

 

type digital

To COAXIAL DIGITAL

audio input

AUDIO OUT

75 coaxial cable (not supplied)

Notes:

DO NOT connect the COAXIAL DIGITAL AUDIO OUT jack of the unit to the AC-3 RF input of a Dolby Digital Receiver. This input on your A/V Receiver is reserved for Laserdisc use only and is incompatible with the COAXIAL DIGITAL AUDIO OUT jack of the unit.

Connect the COAXIAL DIGITAL AUDIO OUT jack of the unit to the “COAXIAL” input of a Receiver or Processor.

Refer to the owner’s manual of the connected equipment as well.

When you connect the unit to other equipment, be sure to turn off the power and unplug all of the equipment from the wall outlet before making any connections.

The output sound of the unit has a wide dynamic range. Be sure to adjust the receiver’s volume to a moderate listening level. Otherwise, the speakers may be damaged by a sudden high volume sound.

Turn off the amplifier before you connect or disconnect the unit’s power cord. If you leave the amplifier power on, the speakers may be damaged.

17

5Q10501A [E]p13-17

17

4/17/04, 11:56 AM

Page 17
Image 17
Toshiba MW24FPX, MW27FPX owner manual MPEG2 sound, Channel digital stereo