TV operation
| TV/VCR |
TV operation | POWER |
| VOLUME / |
TV operation
1 To turn on the unit, press POWER. The Power indicator will light.
• Every time you turn on the TV, the unit starts from TV/VCR mode. When you use TV/VCR after DVD operation, press TV/VCR.
POWER
POWER
Adjust the volume level by pressing VOLUME 2 or .
The volume level will be indicated on the screen by green bars. As the volume level increases, so do the number of bars. If the volume decreases, thenumber of green bars also decreases.
VOLUME32
3 Set the TV/CABLE selection to the appropriate position 26 .
TV - VHF/UHF channels
CABLE - Cable TV channels
4 Press direct channel selection
TV mode direct channel selection
When the TV/CABLE selection is in the TV position, all channels can be instantly selected by using two buttons. (for example, to select channel 2, press “0”, then “2”. If you
press only “2”, channel selection will be delayed for a few seconds.) For channels 10 and above, press the 2 digits in order.
CABLE mode direct channel selection
When the TV/CABLE selection is in the CABLE position, channels can be selected as follows:
TO SELECT CABLE TV CHANNELS:
NOTE FOR CHANNELS
If only 1 or 2 buttons are pressed, the corresponding channel will be selected in 2 seconds.
TV | CATV |
VHF | VHF |
UHF | STD/HRC/IRC |
| (A) (W) |
| |
| (AA) (WW) |
| |
| (AAA) (ZZZ) |
| |
| (86) (94) |
| |
| |
| |
| (100) (125) |
| 01 |
| (5A) |
|
|
TV operation
Notes:
•If a channel with no broadcast is selected, the sound will auto- matically be muted.
•If a station being viewed stops broadcasting, the TV will auto- matically shut itself off after 15 minutes.
23
5Q10501A | 23 | 4/17/04, 11:56 AM |