43
MOTION SETUP
The DVR allows the user to adjust several different Motion Settings and create motion detection areas.
Display full screen video
pop up on motion event
Beep on motion event
Display full screen video pop up on sensor event
Schedule recording at a regular specified interval
Reduces Analog Signal Noise from Motion Detection
Create a Motion Area
1.Click Motion in Setup.
2.Select a camera from the Select Camera list.
3.Select the Detect Detail Motion Area check box.
4.Click Clear.
5.Click Advanced Motion Area Setup.
6.Click a Motion Detection Area shape button.
7.Drag the mouse over the camera image.
Note To create a polygon shape, click the mouse at each point and
8.Click OK.
9.Move the sliders to adjust motion sensitivity and the noise filter.
10.Define the
Pre Alarm – 0 > 50 Seconds [The number of seconds the DVR records before motion is detected]
Post Alarm (MOTION) – 0 > 50 Seconds [The number of seconds the DVR records after motion is detected]
