Auto Sequence Setting

52

Auto Sequence Setting

Auto Sequencing is available either in the Display screen when Auto Sequencing has been enabled or when a Spot-Monitor out signal is used to display on a spot monitor. Auto Sequencing conveniently displays video channels at specified intervals and sequences through each selected channel.

Screen Division Options

Enable SequencingCustom Mode

Enable All Cameras

Select interval between switching cameras

Custom Mode

Create non-standard screen divisions

 

 

Skip 0 FPS Channel

Sequence skips cameras with no video signal

 

 

Create Custom Auto Sequence

1.Open General setup and click Sequence Setting.

2.Click individual cameras in the left pane or click Select All to include all cameras in the sequence.

3.Select an Interval time (in seconds) to display each screen in the sequence.

4.Select screen division options for appropriate cameras.

Page 52
Image 52
Toshiba NVS16-X, NVS32-X, NVS8-X Auto Sequence Setting, Create Custom Auto Sequence, Custom Mode, Skip 0 FPS Channel