Toshiba P200D, P205D Using external display devices, Configuring virtual buttons

Getting Started	65
Using external display devices

Configuring virtual buttons

The virtual buttons at the top of the Dual Mode Pad are pre- configured for the Email, ConfigFree®, and Print functions. You can assign different functions to these buttons if you wish.

The virtual buttons on the bottom of the Dual Mode Pad (buttons 4, 5, and 6 in the Properties for Synaptics LuxPad window) are unassigned by default. In order to use one of these buttons, you must first configure that button so that it is associated with a function.

To configure a virtual button:

1Perform steps 1-5 in “Enabling Dual Mode” on page 64.

2Select the virtual button you wish to configure.

3Select the desired options, and then click OK.

4Click OK.

5Click OK to close the Mouse Properties window.

Using external display devices

Your computer comes with a built-in LCD display, but you can also connect the following types of external display devices to the video ports described below:

❖An HDMI-compatible television or VCR/DVD player via the HDMI Out port*

❖A standard television, projector, or VCR/DVD player via the S-video Out port

❖An external monitor or projector via the RGB (monitor) Out port

	S-video Out port*		HDMI Out port*
RGB (Monitor Out) port		*Available on certain models

(Sample Illustration) Back of system

You cannot connect both the S-video Out port and the HDMI Out port to the same device at the same time.

The system display default is set at the factory to S-video Out.