126 Utilities
Password Utility

Deleting a supervisor password

To delete a supervisor password:
1To access Supervisor Password from the Start screen
begin typing Password Utility, or while in the Desktop
screen double-click or touch the Desktop Assist icon.
2Click or touch Tools & Utilities.
3Click or touch Password Utility.
A pop-up screen appears asking for a password.
4Enter your password, and then click or touch Verify.
5Click or touch Supervisor Password.
6Click or touch Delete.
An authority verification pop-up screen appears.
7Click or touch Delete.
8Enter the password, and then click or touch Verify.
9Click or touch OK to exit.

Using a user password

A user password provides power-on password protection.

Setting a user password

If you choose to set a supervisor or user password,
TOSHIBA strongly recommends that you save your
password in a location where you can later access it
should you not remember it.
TOSHIBA is not responsible for any losses that may
occur to you, your organization or others as a result of the
inability to access your computer.
To register a password for the power-on password functions:
1To access User Password from the Start screen begin
typing Password Utility, or while in the Desktop screen
double-click or touch the Desktop Assist icon.