PORTÉGÉ Z830/Satellite Z830 Series
1.Open the Safely Remove Hardware and Eject Media icon on the Windows Taskbar.
2.Point to memory media and click the left Touch Pad control button.
3.Press the memory media to partially extend it out of the computer.
4.Grasp the media and remove it.
Do not remove the memory media while the computer is in Sleep or Hibernation Mode. The computer could become unstable or data in the memory media could be lost.
Do not remove only the miniSD/microSD Card while leaving the adaptor in the Memory media slot.
External monitor
An external analog monitor can be connected to the External RGB monitor port on the computer. To connect a monitor, follow the steps as detailed below:
Connecting the monitor cable
1.Connect the monitor cable to the External RGB monitor port.
Figure
1
2
1. External RGB monitor port | 2. Monitor cable |
There are no fastening screws for an external monitor cable on this computer's External RGB monitor port. However, external monitor cables which have connectors with fastening screws can still be used.
2.Turn the external monitor's power on.
When you turn on the power, the computer will automatically recognize the monitor and determine whether it is a color or monochrome device. In the event that you find that there are issues getting an image displayed on the correct monitor, you should consider using the FN + F5 hot key to change the display settings (if you then disconnect the external monitor before you turn the computer's power off, be sure to press FN + F5 hot key again to switch to the internal display).
User's Manual |