PORTÉGÉ Z830/Satellite Z830 Series
Dynamic CPU Frequency Mode
This option allows you to configure the power saving modes associated with the processor - the following settings are available:
Dynamically Switcha- The processor's automatic clock speed switching
ble | function is enabled - in use the processor's |
| operation is automatically switched when |
| necessary (default). |
|
|
Always High | The processor's automatic clock speed switching |
| function is disabled - in use the processor will |
| always run at its highest level of power |
| consumption and its highest speed. |
Always Low | The processor's automatic clock speed switching |
| function is disabled - in use the processor will |
| always run at a lower level of power consumption |
| and a low speed. |
|
|
Boot Setting
This function allows you to modify the boot settings.
Boot Priority Options
This tab allows you to set the priority for booting the computer. The Boot Priority Options setting window will be displayed. Click the up and down arrow buttons to adjust the priority.
You can override the settings and manually select a boot device by pressing one of the following keys while the computer is booting:
N | Selects the network. |
1 | Selects the |
|
|
C | Selects the |
M | Selects the USB memory drive. |
|
|
*1 The external optical disc drive will be used to start the computer when there is a bootable disk contained in the drive.
To change the boot drive, follow the steps below.
1.Hold down F12 and boot the computer. when the TOSHIBA Leading Innovation >>> logo screen appears, release the F12 key.
2.Use the up and down cursor keys to select the boot device you want and press ENTER.
If a Supervisor Password has been set, manual boot device selection functions may be restricted.
User's Manual |