4 Replacement Procedures 4.14 Bluetooth Module
M3x3*4
Figure 4.7 Removing the HDD foil
CAUTION: Do not apply pressure to the top or bottom of the drive.
Installing the HDD
Install the HDD according to the following procedures.
CAUTION: To avoid damage, always hold the HDD only by its sides.
1. Place the HDD foil on the HDD and secure it with four M3x3 screws in order as indicated in
Figure 4.7.
CAUTION: To prevent the HDD plate from being distorted when installing the HDD pack
into the laptop, do not press the center of the HDD pack. Always hold the HDD pack by its
sides.
2. Insert the HDD pack into the HDD bay and slide it inward to connect to the motherboard.
3. Secure the HDD pack in the HDD bay with two M2x3 screws.
4. Replace the bottom door and secure it with one M2x4.5 screw.
Satellite T210/T215/Pro T210/Pro T215 Maintenance Manual 4-16