4 Replacement Procedures 4.14 Bluetooth Module
3. Lift the IO board up to an angle and then remove it from the logic lower assembly. Take care
to disengage the connectors from their respective ports without damaging them.
Figure 4.22 Sliding out the IO Board
Installing the IO Board
Install the IO board according to the following procedure:
1. Insert the IO board into the logic lower assembly at an angle and then press it down to seat it
on the logic lower assembly.
2. Secure the IO board with two M2x3 screws.
Satellite T210/T215/Pro T210/Pro T215 Maintenance Manual 4-30