L500/L505/L500D/L505D

Overheating power down

If the processor’s temperature reaches an unacceptably high level with either setting, the computer will automatically shut down to prevent any damage - in this instance all unsaved data in memory will be lost.

Problem

Procedure

Computer shuts downLeave the computer off until the DC IN indicator
and DC IN indicatorstops blinking.
blinks green

 

 

 

It is recommended to leave the computer off until its interior reaches room temperature even though the DC IN indicator stops blinking.

 

If the computer has reached room temperature

 

and it still does not start, or if it starts but shuts

 

down quickly, contact your reseller, dealer or

 

service provider.

 

 

Computer shuts down

This indicates a problem with the heat dispersal
and DC IN indicator issystem - you should contact your reseller, dealer
flashing greenor service provider.

AC power

If you have trouble turning on the computer with the AC adaptor connected you should check the status of the DC IN indicator. Please refer to Chapter 6, Power and Power-up Modes, for further information.

ProblemProcedure

AC adaptor doesn’t power the computer (DC IN indicator does not glow green)

Check the connections to make sure that the power cord/adaptor is firmly connected to the computer and a working power outlet.

Check the condition of the cord and terminals. If the cord is frayed or damaged it should be replaced, while if the terminals are soiled, they should be cleaned with a clean cotton cloth.

If the AC adaptor still does not power the computer, you should contact your reseller, dealer or service provider.

User’s Manual

9-5