4.12 Optical disk drive (DVD-Super Multi drive)/SD board 4 Replacement Procedures
PORTÉGÉ R700 Maintenance Manual (960-833) [CONFIDENTIAL] 4-33
4.12 Optical disk drive (DVD-Super Multi drive)/SD board
Removing the Optical disk drive/SD board
To remove the optical disk drive/SD board, follow the steps below and refer to Figure 4-19
to 4-22.
CAUTION: When the optical disk inside the optical disk drive can not be ejected
because of some failure, open the disc tray by inserting a slender object
(about 15 mm) such as a straightened paper clip into the eject hole near the
eject button.
1. Stand the optical disk drive. (In the case of without optical disk drive, remove the
dummy ODD while releasing the latches.)
Figure 4-19 Removing the optical disk drive/SD board (1)
Optical disk drive