OWNER,S MANUAL - 19
UNIT OPERATION
Sleep Timer
This function enables the user to automatically switch off the unit.
A 
A
ON/OFFSLEEP
TEMP.
MODE | FAN FLAP |
SLEEP
SLEEP
PROCEDURE
If you want to stop the operation after 3 hours from now.
1Press the SLEEP button 3 times
•3:hr will be displayed and the SLEEP signal will be flashing.
•After 5 seconds, the stopping time will be displayed.
•The unit operates in sleep mode for 3 hours and will switch off at the end of the 3 hours.
•To change the reserved time or to cancel,
press the SLEEP Button again.
1:hr 
2:hr 
3:hr 
7:hr 
9:hr 
Cancel
2When the SLEEP Timer is set, the unit will control the set temperature to avoid overcooling or overheating in operation.
Set temperature is changed as shown below.
° C | +0.5° C |
|
+0.5° C
+0.5° C
+0.5° C
SET
TEMP.
30 | 70 | 110 150 | TIME (MIN.) |
SET TIME
FOR COOLING OR DRY MODE
°C 
SET | |
TEMP. |
30 | 90 | 150 | TIME (MIN.) |
SET TIME
FOR HEATING MODE
NOTE
•When the SLEEP timer is set, the luminosity of the unit lamps will be dimmed so as not to interrupt the sleep.
•The SLEEP timer can be combined with the ON timer.( Refer to p.17 for combination )
