Simple wired remote controller Owner’s Manual
2PART NAMES AND FUNCTIONS
Max. 8 indoor units can be operated by a remote controller.
Push each button to select a desired operation.
• The details of the operation needs to be set up once, afterward, the air
conditioner can be used by pushing ON/OFF button only.
Illustration of LCD shown below is for explanation. It may differ from the
1Fan Speed button
3Swing/Air direction button
The louver angle is changed.
4Setup temperature button
Adjust the set point.
Set the desired set point by pushing
5 ON/OFF button
6Check button (Used in
Do not use this button usually.
7Remote control temperature
Usually controlled by the indoor unit
sensor, it can be changed to the
remote controller. For details,
contact the shop which you
purchased the air conditioner. (When
using a group control method, do not
use the remote controller sensor.)
+01EN.BOOK Page 4 Thursday, October 8, 2009 3:37 PM