Set recording by specifying details manually

Set recording by specifying details manually

1)Press TV Guide.

TV Guide On Screen LISTINGS appears.

2)	Press	/	to select “SCHEDULE”.
3)	Press Menu.
	“Schedule Options” appears.
4)	Press	/	to select “new manual recording” then press ENTER.
	“Record Options” appears.
5)	Press	/	to select “date” then press the number buttons to input the date (month, day, year).
	To shift the highlight, press			/ .
6)	Press	/	to select “start” then press the number buttons or / to input the start time (hour, minute,
	am/pm).
	To shift the highlight, press			/ .

Also set “end” in the same manner.

7)	Press	/	to select “channel” then press the number buttons to input a channel number.
8)	Press	/	to select “input” then press /	to select the input.
	Tuner: TV broadcast
	Line 1, 2, 3: external device connected to the recorder
9)	Press	/	to select “recorder” then press	/ to select the recording drive (HDD, DVD).

10)Press ENTER.

“Record Options” is closed.

The icon appears on the TV program.

Notes

•The disc tray does not close automatically, even when the recording start time arrives. Set the recorder loaded an available DVD-RAM/R/RW disc beforehand.

•It it not possible to record the same contents onto both the HDD and a DVD-RAM/R/RW disc simultaneously.

•When there is little time before a programmed recording starts, you may not be able to start another recording.

•Playback of the DVD drive pauses when a programmed recording onto the HDD starts.

•Do not change TV Guide On Screen settings (e.g., cable input, brand, etc.) while a recording is programmed. After then, make the programing again if necessary.

•Confirm the “DVD compatible mode” ( page 184) setting. “Main” or “SAP” records main sound or sub-sound of multiplex broadcasts respectively, and does not record the other. Therefore, select “Main” or “SAP” only when you record onto a DVD- R/RW disc.