Toshiba SD-1810 Connecting to a TV, Notes

Connecting to a TV

Connect the DVD video player to your TV.

Connecting to a TV

Signal flow

OUT PUT
COMPONENT		DIGITAL
Y
S-VIDEO
PB	L	COAXIAL
OPTICAL AUDIO
PR	R	VEDIO
		To S	(red)	(white) (yellow)
		VIDEO
		OUT
To wall outlet		To VIDEO		To AUDIO OUT
		OUT

Audio/video cable (supplied)

To video input

(red)

To audio inputs

(white) (yellow)

S video cable (not supplied)

To S video input

If the TV has an S video input, connect the DVD video player with an S video cable. When using an S video cable, do not connect the yellow video cable.

Set the COMPONENT/S-VIDEO switch to the S-VIDEO position.

TV or monitor with audio/video inputs

Notes

•Refer to the owner’s manual of the connected TV as well.

•When you connect the DVD video player to your TV, be sure to turn off the power and unplug both units from the wall outlet before making any connections.

•If your television set has one audio input, connect the left and right audio outputs of the DVD video player to a Y cable adapter (not supplied) and then connect to your TV.

•Connect the DVD video player directly to your TV. If you connect the DVD video player to a VCR, TV/VCR combination or video selector, the playback picture may be distorted as DVD video discs are copy protected.

16

Contents

Page WARNING Location of the required label Page Page (Continued) Page Notes on handling Notes on locating Notes on cleaning To obtain a clear picture Notes on moisture condensation On handling discs On cleaning discs On storing discs Structure of disc contents Notes on copyright About this owner’s manual Notes on region numbers On VIDEO CDs Playable discs Introduction Connections Connecting to Optional Equipment Playback operation Advanced Function Front panel Rear panel DVD display DVD video disc VIDEO CD Audio CD Remote control Loading batteries Operating with the remote control Point the remote control at the remote sensor and press the buttons Connecting to a TV Connecting to an audio system and TV equipped with component video inputs Connecting to an amplifier equipped with a Dolby Digital decoder Connecting to an amplifier equipped with Dolby Pro Logic Surround Connecting to an amplifier equipped with a DTS decoder Connecting to an amplifier equipped with an MPEG2 audio decoder Connecting to an amplifier equipped with a digital audio input welcome Note: CLOSE 3 Press PLAY or OPEN CLOSE (POWER) Fast Forward Playback Review Playback Still Playback Frame Advance Slow-motionPlayback MP3 CD Information Zooming Locating Desired Scene Title, Chapter and Track Playback DVD Audio/MP3 CD A-BRepeat Playback Program playback Random playback Marking the scenes Returning to the scenes To cancel the mark Karaoke playback Changing soundtrack language Setting the Spatializer Subtitles Turning the Subtitles On and Off Changing the subtitle language Changing Angles Title Selection DVD Menu You can select an aspect ratio appropriate to your TV 4:3 Normal TV 4:3 PAN SCAN (Conventional mode) 16:9 WIDE SCREEN Setting on Screen display On screen display can be viewed when you press the operation buttons On: Off: Disc status ENTER to Max: Std: Min: Level Off : Level 8 : Level 1 : • When each setup function (P.30~38) has been completed, the unit can If you forget the password or ENTER 2 Press number buttons number buttons (0-9) to 7 Press SET UP or RETURN It is up to you to decide whether on not to cancel the rating level number buttons You can select the language of the DVD disc menu display English, Francais, Espanol: Other: Automatic: •English, Francais, Espanol: Original: Page Symptoms and correction DVD video player / outputs / supplied accessories LIMITED WARRANTY DVD VIDEO PLAYER LIMITED WARRANTY DVD VIDEO PLAYER (continued)