Toshiba SD-185 manual Aspect Ratio, View Mode, Video Out, Smart Picture, TV System

DVD Menu Options

English

The options for the selected item appears.

If the selection in the menu is greyed out, that means the feature is not available or not possible to change at the current state.

DUse  /  to select a setting and press OK to confirm.

Example: { P-Scan}

The setting is selected and setup is completed.

ETo exit, press SETUP.

Aspect Ratio

The picture shape can be adjusted to fit your TV and the format must be available on the playback disc. Otherwise, the TV display will not affect the picture during playback.

AIn ' Video ', press  /  to select {Aspect Ratio }, then press .

{4:3 }

Select this if you have a normal TV. A 'wide-screen' source display with black bars on the top and bottom

will be displayed on the TV screen.

{16:9 }

Select this for wide-screen TV (frame ratio 16:9).

BUse  /  to select a setting and press OK to confirm.

View Mode

Use view mode to scale an image that fits to the TV screen's width and height.

AIn ' Video ', press  /  to select { View Mode }, then press .

{ Fill }

Fill the screen with decoded image.

{Original }

Display image as its original size.

{Height Fit }

Fit the screen height with image height.

{Width Fit }

Fit the screen width with image width.

{Auto Fit }

Automatically display the decoded image on screen

A playback picture may be distorted when detected a signal change between PAL and NTSC on the disc. For the case of Progressive mode, your multisystem TV must be able to support 525p and 625p.

Video Out

The video output of the DVD player can be selected as “Component”, “RGB” or “P-Scan”.

A In ' Video ', press  /  to select { Video Out }, then press .

{Component }

Select this for component video connection.

{RGB }

Select this for Scart connection.

{P-Scan }

Select this when you connect your DVD player to your TV, which has component video inputs that supports progressive scan.

BUse  /  to select a setting and press OK to con- firm.

Smart Picture

This DVD player provides four predefined sets of picture color settings.

AIn ' Video ', press  /  to select {Smart Picture }, then press .

{ Standard }

Select this for a preset standard picture setting.

{Vivid }

Select this to make the picture brighter.

{Cool }

Select this to make the picture softer.

{Personal }

Select this to personalize your picture color by adjusting the brightness, contrast, tint and color

(saturation).

BUse  /  to select a setting and press OK to confirm.

CIf you select { Personal }, then proceed to steps D~G.

The setup menu appears.

at a suitable size.

Brightness0

{Pan Scan }

Contrast

0

Automatically display decoded image on full screen

Tint

0

without distortion.

BUse  /  to select a setting and press OK to confirm.

Tip:

-Depending on the type of disc, you may not be able to view the mode as selected.

TV System

The video standard of the DVD player output can be selected from “NTSC”, “PAL” or “Multi”.

{NTSC }: Select if your TV system is NTSC.

{PAL }: Select if your TV system is PAL.

{Multi }: The DVD video player automatically identifies PAL or NTSC video system of a disc. Connect a multisystem TV (PAL/NTSC compatible) to view a picture.

Helpful hint: Press  to go back to previous menu item. Press SETUP to exit the menu item.

Color0

Close

DPress  /  to highlight one of the following options.

Brightness

Increase the value to brighten the picture or vice versa. Choose zero (0) for average setting.

Contrast

Increase the value to sharpen the picture or vice versa. Choose zero (0) to balance the contrast.

Tint

Increase the value to darken the picture or vice versa. Choose zero (0) for average setting.

Color

Increase the value to enhance the colour in your picture or vice versa. Choose zero (0) to balance the colour.

EPress  /  to adjust the setting that best suits your personal preference.

19