![](/images/new-backgrounds/1225257/22525729x1.webp)
Connections
Content of the output for each output jack is shown in the following table and differ depending on the
Content of output for each output jack |
|
| |||||
"Video Output" | HDMI Output | HDMI | Video | Component | AV |
|
|
Setting | Setting * | Output | Output | Output | Output |
|
|
RGB | Invalid | - | Composite | - | RGB |
|
|
Component | Invalid | - | Composite | 576i | Composite |
|
|
| |||||||
(Interlaced) |
|
|
|
|
|
|
|
Invalid | - | Composite | 576p | Composite |
|
| |
(Progressive) |
|
|
|
|
|
| Connections |
| 1080i | 1080i | - | - | - |
| |
| 576p | 576p | Composite | 576p | Composite |
|
|
HDMI | 720p | 720p | - | - | - |
|
|
|
|
|
|
|
|
|
|
| 1080p | 1080p | - | - | - |
|
|
*Settings for HDMI output format are performed using the HDMI button on the remote control or the HDMI SELECT button on the front panel.
Note
If Auto is selected, it follows preference HDMI aspect ratio of TV.
Connecting to Optional Equipment
You can enjoy high quality dynamic sounds by connecting the DVD player to optional audio equipment.
•For connection to your TV, see “Connecting to a TV” .
•This section uses the following reference marks.
: Front speaker
: Rear speaker
: Sub woofer
: Center speaker
: Signal flow
Warning
•When you are connecting (via the COAXIAL DIGITAL AUDIO OUT jack) an AV decoder that does not have Dolby Digital, Digital Theater Systems (DTS) or MPEG2 decoding function, be sure to set “Digital Output” to “PCM” from the
•When playing
Notes
•DO NOT connect the COAXIAL DIGITAL AUDIO OUT jack of the DVD player to the
•Connect the COAXIAL DIGITAL AUDIO OUT jack of the DVD player to the “DIGITAL (COAXIAL)” input of a Receiver or Processor.
•Refer to the owner’s manual of the connected equipment as well.
•When you connect the DVD player to other equipment, be sure to turn off the power and unplug all of the equipment from the wall outlet before making any connections.
•The output sound of the DVD player has a wide dynamic range. Be sure to adjust the receiver’s volume to a moderate listening level. Otherwise, the speakers may be damaged by a sudden high volume sound.
•Turn off the amplifier before you connect or disconnect the DVD player’s power cord. If you leave the amplifier power on, the speakers may be damaged.
15