Toshiba SD-6980SU owner manual Connections, Connection to a TV Progressive

00839A-SD-6980SU-1 6/29/05 9:13 AM Page 17

Connections

Connection to a TV (Progressive)

1

Using component video cables (not supplied), connect the COMPONENT VIDEO OUT terminals on the rear of the DVD player to the COMPONENT IN terminals of your TV.

2

Using the audio cables, connect the AUDIO (red and white) OUT terminals on the rear of the DVD player to the AUDIO (red and white) IN terminals of your TV.

Turn on the DVD player and TV.

3

Press the input selector on your TV remote control until the Component signal from the DVD player appears on the TV screen.

			RED	BLUE	GREEN
	RED		WHITE
	Audio Cable
					Component cable
		RED	BLUE	GREEN	(not supplied)
RED	WHITE

Connections

4

Set the Video Output to HDMI/COMPONENT(P-SCAN)in the Display Setup menu. (See pages 64 to 65)

You can use the V.OUT button to change the Video Output mode. (See page 14)

To see the progressive video output,

-Consult your TV User’s Manual to find out if your TV supports Progressive Scan.

If Progressive Scan is supported, follow the TV User’s Manual regarding Progressive Scan settings in the TV’s menu system.

-Depending on your TV, the connection method may differ from the illustration above.

Note

-What is "Progressive Scan"?

Progressive scan has twice as many scanning lines as the interlace output method. Progressive scanning method provides better and clearer picture quality.

ENG-17