Toshiba SD-6980SU Controlling a TV with the Remote Control, Setting Control Codes, Number buttons

00839A-SD-6980SU-2 6/29/05 9:02 AM Page 70

Reference

Controlling a TV with the Remote Control

The remote control can be compatible with various brands of TV by setting their control codes. The TOSHIBA code has initially been set to control TOSHIBA TVs.

Setting Control Codes

1.Press TV to set the remote control operating your TV.

2.While holding down PROGRAM button enter the two diglts of your TV’s brand code (listed right) using number buttons.

3.Release PROGRAM.

4.Point the remote control at your TV and use each button listed below to make sure your TV is operated correctly.

TV POWER

To turn the TV on or off.

CH

To select TV channels in the upper or lower direction.

TV VOL.

To adjust the sound level.

INPUT

To select an external source such as a VCR.

Number buttons

To select TV channels. When selecting channels 1 to 9, first enter 0 and then the desired number.

100

To substitute for 100 channel key.

DISPLAY

To turn on or off TV’s screen display.

ENTER

To use for the TV’s ENTER key.

Table of Brand Codes

BRAND	CODE
TOSHIBA	PROGRAM + 01
RCA/GE	PROGRAM + 02
SONY	PROGRAM + 03
MITSUBISHI	PROGRAM + 04
JVC	PROGRAM + 05
HITACHI	PROGRAM + 06
PANASONIC A	PROGRAM + 07
SHARP NEW	PROGRAM + 08
SANYO	PROGRAM + 09
MAGNAVOX	PROGRAM + 10
GOLDSTAR NEW	PROGRAM + 11
SAMSUNG	PROGRAM + 12
SHARP OLD	PROGRAM + 13
ZENITH	PROGRAM + 14
PANASONIC B	PROGRAM + 15
PIONEER	PROGRAM + 16

Note

•Some TV’s may not respond to all the operations above, or may not be operated at all with this remote control. In this case, operate your TV with its own remote control.

•For some brands, several control codes (brand codes) are allocated. Try each of them until the buttons work on your TV.

•If you replace the remote control’s batteries, set the brand code again.

ENG-70