Connections
Connecting to a TV
Connect the DVD player to your TV.
Connecting to a TV (Using the phono type jacks)
Connections
Normal TV
To audio 
To video
input 
input 
(yellow)
To VIDEO | To 2ch AUDIO OUT |
OUT | (R: red, L: white) |
(yellow) |
|
|
Audio/Video cables (supplied)
• Make the following setting.
Select: | Page | ||
|
|
| |
“Digital Output” | “Off”, | 34 | |
“PCM” or | |||
|
| ||
| “Bitstream” |
| |
|
|
| |
“Video Output” | Component | 34 | |
| |||
| HDMI |
| |
|
|
|
Notes
•Refer to the owner’s manual of the connected TV as well.
•When you connect the DVD player to your TV, be sure to turn off the power and unplug both units from the wall outlet before making any connections.
•If your television set has one audio input, connect the left and right audio outputs of the DVD player to a Y cable adapter (not supplied) and then connect to your TV.
•Connect the DVD player directly to your TV. If you connect the DVD player to a VCR, TV/VCR combination or video selector, the playback picture may be distorted as DVDs are copy protected.
•Analogue audio out will not have sound if DTS playback is selected.
11
