Canon HFM46 Preparing the Accessories, Wireless Controller, To use the wireless controller

Models: HFM46

1 187
Download 187 pages 6.1 Kb
Page 21
Image 21
Preparing the Accessories

Wireless Controller NOTES

We recommend charging the battery pack in temperatures between

10 °C and 30 °C. If either the ambient temperature or the battery pack’s temperature is outside the range of approx. 0 °C to 40 °C, charging will not start.

The battery pack will be charged only when the camcorder is off.

If the power supply was disconnected while charging a battery pack, make sure the ON/OFF (CHG) indicator has gone out before restoring the power supply.

If remaining battery time is an issue, you can power the camcorder using the compact power adapter so the battery pack will not be con- sumed.

Charged battery packs continue to discharge naturally. Therefore, charge them on the day of use, or the day before, to ensure a full charge.

We recommend that you prepare battery packs to last 2 to 3 times longer than you think you might need.

Preparing the Accessories

Wireless Controller

First, insert the supplied CR2025 lithium button battery into the wire- less controller.

1 Press the tab in the direction of the arrow and pull out the battery holder.

2 Place the lithium button battery with the + side facing up.

3 Insert the battery holder.

Tab

To use the wireless controller

Point the wireless controller at the camcorder’s remote sensor when you press the buttons.

You can rotate the LCD panel 180 degrees to use the wireless controller from the front of the camcorder.

Preparations Š 21

Page 21
Image 21
Canon HFM46, HFM406 instruction manual Preparing the Accessories, Wireless Controller, To use the wireless controller