May not be possible to record movies on this memory card
-You may not be able to record movies on a memory card without a Speed Class rating. Replace the memory card with one rated SD Speed Class 2, 4, 6 or 10.
Mem. Card Number of scenes already at maximum
-The memory card already contains the maximum number of scenes (3,999 scenes); no further scenes can be copied onto the memory card. Delete some scenes (054) to free some space.
Mem. Card Unable to recognize the data
-The memory card contains scenes recorded using a video configuration that is not supported (NTSC). Play back the recordings in the memory card with the device originally used to record them.
Memory card cover is open
- After inserting a memory card, close the double memory card slot cover.
Memory card is full
-The memory card is full. Delete some recordings (054, 112) to free some space or replace the memory card.
Memory card is
- The LOCK switch on the memory card is set to prevent accidental erasure. Change the posi- tion of the LOCK switch.
Need to recover files from the memory card. Change the position of the LOCK switch on the memory card.
- This message will appear the next time you turn on the camcorder if power supply was acci- dentally interrupted while the camcorder was writing on the memory card and later the posi- tion of the card's LOCK switch was changed to prevent erasure. Change the position of the LOCK switch.
No memory card
- Insert a compatible memory card into the camcorder (035).
No photos
- There are no photos to play back. Have fun taking some photos (040).
No scenes
- There are no scenes in the memory selected. Have fun shooting some video (040).
Not enough available space
-Delete some recordings on the memory card (054, 112) or select the [3 Mbps] bit rate for the conversion to SD.
Number of scenes already at maximum
-The maximum number of scenes (3,999 scenes) has been reached. Delete some scenes (054) to free some space.
