Relay Recording

You can activate the relay recording so if the memory you are using becomes full while recording movies, the recording will continue unin- terrupted on a memory card.

When recording on memory card X, you can use memory card Y for

relay recording (497). only: When recording in the built-in memory, you can choose to use only memory card X for relay record- ing (f94), or use both memory cards (f9497).

Operating modes:

1Insert a memory card that contains no video recordings into the card slot of the memory card you want to use for relay recording.

When relay recording from the built-in memory ( only): memory card slot X or both memory card slots.

When relay recording from memory card X: memory card slot Yonly.

2 Activate the relay recording.

[FUNC.] 8[MENU] 888[Rec Media for Movies] 8

[f] ( only) or [4] 8 [Relay Recording] 8Desired option* 8 [a]

*The approximate available recording time will now reflect the combined space in the memories used for relay recording.

NOTES

You cannot use relay recording from the built-in memory to mem- ory card Y. When using a single memory card, be sure to insert it into memory card slot X.

There will be a momentary stop in the scene at the point where the camcorder switches from one memory to another.

Any of the following actions will deactivate the relay recording function:

-Turning off the camcorder.

-Opening the double memory card slot cover.

-Changing the position of the mode switch.

-Changing the camcorder’s operating mode.

-Changing the memory used for recording movies.

Preparations Š 37

Page 37
Image 37
Canon HFM46, HFM406 instruction manual Relay Recording