Canon HFM46, HFM406 instruction manual Indicators and Onscreen Displays

Cannot mark individual scenes/photos in the index screen with a checkmark O

-You cannot select more than 100 scenes/photos individually. Select the [All Scenes] or [All Photos] option instead of [Select].

Indicators and Onscreen Displays

lights up in red.

- Battery pack is exhausted. Replace or charge the battery pack.

appears on the screen.

-The camcorder cannot communicate with the battery pack attached so the remaining battery time cannot be displayed.

4/7lights up in red.

-A memory card error occurred. Turn off the camcorder. Remove and reinsert the memory card. Initialize the memory card if the display does not change back to normal.

-The memory card is full. Replace the memory card or delete some recordings (054, 112) to free some space on the memory card.

Even after stopping recording, the ACCESS indicator does not go off.

- The scene is being recorded in the memory. This is not a malfunction.

p appears on the screen.

-The camcorder has become hot while in the [Underwater] or [Surface] recording program. Turn off the camcorder and let it cool down.

The red ON/OFF (CHG) indicator flashes rapidly ( one flash at 0.5-second intervals).

- Charging has stopped because the compact power adapter or the battery pack is faulty. Con- sult a Canon Service Center.

The red ON/OFF (CHG) indicator flashes very slowly ( one flash at 2- second intervals).

-The temperature of the battery pack is outside its operating range (approximately 0 – 40 °C). Remove the battery pack, warm it or let it cool down, as necessary, and try charging it again.

-Charge the battery pack in temperatures between approximately 0 °C and 40 °C.

-The battery pack is damaged. Use a different battery pack.

oappears on the screen

-The LOCK switch on the Eye-Fi card is set to prevent accidental erasure. Change the position of the LOCK switch.

-An error occurred when trying to access control data on the Eye-Fi card. Turn the camcorder off then on again. If the icon appears often, there might be a problem with the Eye-Fi card. Contact the card manufacturer’s customer care.

Additional Information Š 157