Canon HFM406 Adjusting the Position and Brightness of the LCD Screen, Rotating the LCD Panel

Models: HFM46

1 187
Download 187 pages 6.1 Kb
Page 24
Image 24
Adjusting the Position and Brightness of the LCD Screen

Adjusting the Position and Brightness of the LCD Screen

Rotating the LCD Panel

Open the LCD panel 90 degrees.

You can rotate the panel 90 degrees downward.

You can rotate the panel 180 degrees toward the lens. Rotating the LCD panel 180 degrees can be useful in the following cases:

-To include yourself in the picture when recording with the self timer.

-To allow the camcorder to be operated with the wireless controller from the front.

180°

180°

90°

Subject can monitor the LCD screen

 

Rotating the LCD Panel NOTES

About the LCD screen: The screen is produced using extremely high-pre- cision manufacturing techniques, with more than 99.99% of the pixels operating to specification. Less than 0.01% of the pixels may occasion- ally misfire or appear as black, red, blue or green dots. This has no effect on the recorded image and does not constitute a malfunction.

LCD Backlight

When recording in bright places it may be difficult to use the LCD screen. Turn on the LCD backlight to make it brighter.

With the camcorder on, hold hpressed down for more than 2 seconds.

Repeat this action to switch the LCD backlight between off (normal) and on (bright).

24 Š Preparations

Page 24
Image 24
Canon HFM406, HFM46 Adjusting the Position and Brightness of the LCD Screen, Rotating the LCD Panel, LCD Backlight