Panasonic SC-BT228 Speaker installation option, Adjusting speaker level, Attaching to a wall

Adjusting speaker level

Volume (Channel balance) (	dB	)
	0

(Effective when playing multi-channel audio)

1 Select “Test” and press [OK].

A test signal is output.

2 While listening to the test signal

Press [3, 4] to adjust the volume of each speaker.

The volume can be adjusted between r6 dB to s6 dB.

≥Set each speaker level according to the volume of the Front (L) and Front (R) speaker volume respectively.

≥No signal is output for the subwoofer. To adjust its volume, see page 18, “Adjusting speaker level during play”.

3 Press [OK].

The test signal stops.

			
L	ms	C	dB	R
	0.0		0

	Complete		dB
	Test		0
			SW
	dB	ms	dB
	0	0.0	0
	LS		RS

ACenter (C) B Test

C Left Surround (LS), Right Surround (RS)

To finish the speaker setting

Press [3, 4, 2, 1] to select “Complete” and press [OK].

Speaker installation option

Attaching to a wall

You can attach all of the speakers (except subwoofer) to a wall.

≥The wall or pillar on which the speakers are to be attached should be capable of supporting 10 kg (22 lbs) per screw. Consult a qualified building contractor when attaching the speakers to a wall. Improper attachment may result in damage to the wall and speakers.

≥Do not attempt to attach these speakers to walls using methods other than those described in this manual.

1 Drive a screw (not included) into the wall.

	
	





AAt least 30 mm (1 3/16q) B ‰ 4.0 mm (5/32q)

C ‰ 7.0 mm to 9.4 mm (9/32q to 3/8q) D Wall or pillar

E 5.5 mm to 7.5 mm (7/32q to 5/16q)

2 Fit the speaker securely onto the screw(s) with the hole(s).

Front speaker and surround speaker

Center speaker



F 100 mm (3 15/16q)

VQT2T10

32