Panasonic VQT2T10 Easy control only with VIERA remote control, One touch play, Speaker control

One touch play

You can turn on this unit and the TV, and start play with a single press of a button.

While the unit and the TV are in standby mode; Press [1 PLAY].

Speaker control

You can select whether audio is output from the unit’s speakers or the TV speakers by using the TV menu settings.

Home theater

This unit’s speakers are active.

≥When this unit is in standby mode, changing the TV speakers to this unit’s speakers in the TV menu will automatically turn the unit on and select “AUX”*1, “ARC”*1 or “D-IN 1” (DIGITAL IN 1)*1 as the source.

≥You can control the volume setting using the volume or mute button on the TV’s remote control.

≥If you turn off this unit, TV speakers will be automatically activated.

TV

TV speakers are active.

≥The volume of this unit is set to “0”.

≥Audio output is 2-channel audio.

≥When switching between this unit’s speakers and TV speakers, the TV

screen may be blank for several seconds.

Automatic input switching (Power on link)

When the following operations are performed, the television will automatically switch the input channel and display the corresponding action. When the TV is off, the TV will automatically turn on.

jWhen play starts on the unit

Automatic lip-sync function (for HDAVI Control 3 or later)

Delay between audio and video is automatically adjusted, enabling you to enjoy smooth audio for the picture (> 30, “Audio Delay”).

≥This function works only when “BD/DVD”, “SD”, “AUX”*1, “ARC”*1, “D-IN 1” (DIGITAL IN 1)*1 or “D-IN 2” (DIGITAL IN 2)*2 is selected as the source on this unit.

*1 “AUX”, “ARC” or “D-IN 1” works depending on the setting in “Setting the audio link with the TV”.

*2 “D-IN 2” works depending on the setting in “Setting the audio link with the STB”.

Power off link

All connected equipment compatible with “HDAVI Control”,
including this unit, automatically turns off when you switch the
television off.
Playing music continuously even after turning off the TV
(When the unit is connected to a Panasonic TV (VIERA) that
supports HDAVI Control 2 or later.)	TV
Select “Video” in “Power Off Link” (> 31)

Easy control only with VIERA remote control

Only TV supports “HDAVI Control 2” or later

By using the TV remote control, you can play discs using the “Control Panel” and display the Top Menu or Pop-up Menu, etc.

≥This works only during “BD/DVD” or “SD” playback and resume modes.

jWhen an action that uses the display screen is performed (e.g., Direct Navigator screen)

≥When you switch the TV input to TV tuner mode, this unit will automatically switch to “AUX”*1, “ARC”*1 or “D-IN 1” (DIGITAL IN 1)*1 or “D-IN 2” (DIGITAL IN 2)*2.

≥This function does not work when the iPod selector is chosen. (> 26)

1 Press [SUB MENU].

2 Select an item and press [OK].

≥You cannot use the sub menu while the Top Menu for BD-Video or DVD-Video is displayed.

Control Panel

Screen Aspect

Top Menu

Pop-up Menu

SUB OK

MENU RETURN

≥The buttons that you can use for this unit vary depending on the TV. For details, refer to the operating instructions of the TV.

≥The operation of this unit may be interrupted when you press incompatible buttons on the TV remote control.

≥Depending on the menu, some button operations cannot be performed from the TV’s remote control.

VQT2T10

25