08 Using the Remote Control
How to Use the Remote Control
Surround | BluetoothPOWER | ||
|
| SOUND |
|
|
| MODE |
|
|
|
|
VOL WOOFER
Turns the Soundbar on and off.
Power
You can select from TREBLE, BASS, or AUDIO
| SYNC. |
| •• To control the volume of the treble or bass |
Sound Control | sound, select TREBLE or BASS in Sound |
| Settings, and then adjust the volume |
| between |
| buttons. |
| •• If the video and audio between the TV and |
| your Soundbar are not synchronized, select |
| AUDIO SYNC in Sound Settings, and then |
| set audio delay between 0~300 milliseconds |
| by using the Up/Down buttons. |
| (Except “USB” mode) |
| •• Audio Sync is only supported in some |
| functions. |
The Surround Sound function adds depth and a
SOUNDBAR
Surround | sense of space to sound. |
Surround | Each time you press this button, ON and OFF |
alternate. | |
| •• ON : Play sound over all the speakers. |
| •• OFF : You can hear the sound of the original |
| source channel from several speakers. |
SOUND | You can select the desired sound effect by choosing STANDARD, MUSIC, CLEAR VOICE, | |
| MODE | SPORTS, or MOVIE. |
| SOUND MODE | •• DRC (Dynamic Range Control) |
| Lets you apply dynamic range control to Dolby Digital tracks. If you press and hold the | |
|
| |
|
| SOUND MODE button while in standby mode, DRC (Dynamic Range Control) turns on |
|
| or off. With the DRC turned on, loud sound is reduced. (The sound may be distorted.) |
Press to select a source connected to the Soundbar.
| •• BT PAIRING mode |
|
Source | To turn on “BT PAIRING” mode in “BT” mode, press and hold the | (Source) button |
for more than 5 seconds. See page 12 for details. |
| |
|
|
ENG - 13
