Vermont Castings, Majestic Products: DVR33

Remote Controls

Optional remote control units are available to control different functions of the appliance (only for RN/RP models).

Model

Function(s) Controlled

MRC1

ON/OFF

MRC2

ON/OFF and Temperature

MRC3

ON/OFF and Temperature control

 

with a digital display and a

 

programmable 24-hour clock

IMT

Wall-mounted thermostat control

Ceramic Refractory Panels

Adjustable

 

 

tab

 

Adjustable

 

 

 

 

tab

Side

Back Panel

Log

panel

Support

 

 

 

Side

 

BURNER HOUSING

panel

 

ASSEMBLY

 

Lower

 

Lower

side

 

side

support

 

support

Floor refractory panel

FP1193

Fig. 52 Install ceramic refractory panels.

Ceramic refractory panels are available to line the firebox area.

Unit

Kit Model

DVR33DVR33CR

Take care when handling the refractory panels as they are fragile until held in place and supported.

Installation (refer to Fig. 52 and Fig. 54)

Rear Refractory Panel

Rear Panel

Support Brackets

Rear Log Support

Firebox Back

FP1194

1.Remove the window frame assembly

2.Remove the logs.

3.Place the lower supports for the side refractory panels on the base of the firebox. Place each support so that the slotted hole fits over the forward screw head along the edge of the base.

4.Lay the angular base panels in place on the floor of the firebox on either side of the burner housing assembly.

5.Loosely attach the top adjustable tabs to the studs located in the top of the firebox toward the front corners.

6.Place the rear refractory panel in place. Locate the ‘small brick’ edge of the panel into the two small supports on the back panel just above the rear log support.

7.Slide the side refractory panels into place to hold the rear panel secure. Adjust the top adjustable tabs to hold the side panel against the firebox wall and secure the tab. Repeat the procedure on the other side.

8.Replace the logs and window frame assembly.

NOTE: For aesthetic purposes, we recommend aligning the horizontal mortar lines.

Fig. 53 Place the rear panel on rear support brackets.

Decorative Bay Windows

The original front frame/glass assembly MUST remain in place when fitting the bay window kits. The bay window kit fits over existing front glass.

Bay window kits are available for model DVR33 fireplace.

Installation

1.Remove the existing louvre assembly bottom complete with the hinges.

2.Remove the louvre assembly top.

3.Assemble the Bay Window Kit according to the instructions supplied with the kit.

4.Place the 2 pieces of ceramic refractory along the base of the bay window (Fig. 54).

5.Hang the Bay Window Assembly over the existing window frame assembly.

6.Reinstall the upper louvre assembly.

Do not remove the existing window frame assembly.

38

10004920

Page 38
Image 38
Vermont Casting DVR33 manual Remote Controls, Ceramic Refractory Panels, Decorative Bay Windows

DVR33 specifications

The Vermont Casting DVR33 is a prominent name in the hearth solutions market, known for blending exceptional design with advanced heating technology. This distinctive gas fireplace is engineered to offer both efficiency and aesthetic appeal, making it a valuable addition to any home.

One of the primary features of the DVR33 is its realistic flame presentation. Utilizing advanced gas burner technology, it creates a mesmerizing fire that mimics the beauty of traditional wood-burning fireplaces. The flames dance and flicker, providing warmth and comfort while generating an inviting ambiance that enhances any living space.

The DVR33 is designed with energy efficiency in mind. With an efficiency rating of up to 80 percent, this model ensures that minimal heat is lost, making it a cost-effective heating solution. It is also equipped with a sealed combustion system that draws air from outside for combustion, ensuring improved indoor air quality and reducing energy costs.

Safety is another critical aspect of the DVR33. It comes with an electronic ignition system that ensures reliable performance without the need for continuous pilot lights, thus conserving energy. The adjustable flame height and heat output provide users with control over their heating needs, allowing for personalized comfort levels depending on the season or occasion.

Aesthetically, the DVR33 offers a customizable design. Homeowners can select from various fronts, finishes, and decorative options, allowing them to seamlessly integrate the fireplace into their existing decor. The unit also includes a realistic ceramic log set that enhances the lifelike appearance of the flames.

In terms of maintenance, the DVR33 is designed for convenience. It requires minimal upkeep, and the accessible controls simplify operation. Additionally, Vermont Castings offers an impressive warranty, underscoring their commitment to quality and customer satisfaction.

Overall, the Vermont Casting DVR33 stands out as a high-quality gas fireplace that combines technology, efficiency, and design. With its beautiful flame presentation, customizable options, and focus on safety, it’s an ideal choice for anyone looking to enhance their home with the warmth and elegance of a gas fireplace.