Manuals / Vermont Casting / Kitchen Appliance / Ventilation Hood

Vermont Casting DVR33 Operating Instructions, Glass Information, Louvre Removal, Glass Cleaning

Models: DVR33

1 40
Download 40 pages 55.55 Kb
Page 23
Image 23

Vermont Castings, Majestic Products: DVR33

Operating Instructions

Glass Information

Use only glass approved by Vermont Castings, Majestic Products on this fireplace.

•The use of any non-approved replacement glass will void all product warranties.

•Care must be taken to avoid breakage of the glass.

•Under no circumstances should this appliance be operated without the front glass in place, or with the glass in a damaged condition.

•Replacement glass (complete with gasket) is available through your Vermont Castings, Majestic Products dealer, and should only be installed by a licensed qualified service person.

Louvre Removal

To remove the louvre assembly top, lift the panel up and out from the fireplace (Fig. 38).

NOTE: The louvre assembly bottom is hinged at the bottom edge and swings down.

2.

Louvre Assembly Top

1.

Window Frame Assembly

FP444

Fig. 38 Remove louvre assembly top.

Window Frame Assembly Removal

1.Turn the fireplace OFF (including the pilot).

2.If the unit has been operating, allow time for the components to cool.

3.Remove the louvre assembly top.

4.Open the louvre assembly bottom.

5.Release the two clamps along lower edge of the frame by pulling down on clamp handles (Fig. 39).

6.Tilt window frame assembly out slightly at the bottom, lift the frame up and away from the fireplace.

7.To replace window frame assembly, reverse this procedure.

Lower

Clamps

Window Frame

Assembly

Window

Frame

Assembly

Pull Clamp Hook

Push Clamp

Handle

FP1191

Fig. 39 Window frame assembly removal.

Glass Cleaning

It is necessary to periodically clean the glass panel.

During start-up, it is normal for condensation to form on the inside of the panel. This condensation causes lint, dust and other airborne particles to cling to the surface of the glass.

Also, initial paint curing may deposit a slight film on the glass. It is therefore recommended the glass panel be cleaned two or three times with a non-ammonia-based household cleaner and warm water within the first few weeks of operation. We recommend using gas fireplace glass cleaner.

After the initial cleaning process, clean the glass two or three times during each operating season, depending on the environment in the house.

Clean the glass after the first two weeks of operation.

Do not clean glass when it is hot.

Do not use abrasive cleaners.

Do not strike or slam the glass.

10004920

23

Page 22 Page 24
Page 23
Image 23
Vermont Casting DVR33 manual Operating Instructions, Glass Information, Louvre Removal, Window Frame Assembly Removal
Page 22 Page 24

DVR33 specifications

The Vermont Casting DVR33 is a prominent name in the hearth solutions market, known for blending exceptional design with advanced heating technology. This distinctive gas fireplace is engineered to offer both efficiency and aesthetic appeal, making it a valuable addition to any home.

One of the primary features of the DVR33 is its realistic flame presentation. Utilizing advanced gas burner technology, it creates a mesmerizing fire that mimics the beauty of traditional wood-burning fireplaces. The flames dance and flicker, providing warmth and comfort while generating an inviting ambiance that enhances any living space.

The DVR33 is designed with energy efficiency in mind. With an efficiency rating of up to 80 percent, this model ensures that minimal heat is lost, making it a cost-effective heating solution. It is also equipped with a sealed combustion system that draws air from outside for combustion, ensuring improved indoor air quality and reducing energy costs.

Safety is another critical aspect of the DVR33. It comes with an electronic ignition system that ensures reliable performance without the need for continuous pilot lights, thus conserving energy. The adjustable flame height and heat output provide users with control over their heating needs, allowing for personalized comfort levels depending on the season or occasion.

Aesthetically, the DVR33 offers a customizable design. Homeowners can select from various fronts, finishes, and decorative options, allowing them to seamlessly integrate the fireplace into their existing decor. The unit also includes a realistic ceramic log set that enhances the lifelike appearance of the flames.

In terms of maintenance, the DVR33 is designed for convenience. It requires minimal upkeep, and the accessible controls simplify operation. Additionally, Vermont Castings offers an impressive warranty, underscoring their commitment to quality and customer satisfaction.

Overall, the Vermont Casting DVR33 stands out as a high-quality gas fireplace that combines technology, efficiency, and design. With its beautiful flame presentation, customizable options, and focus on safety, it’s an ideal choice for anyone looking to enhance their home with the warmth and elegance of a gas fireplace.