Digital Audio Output
Press [OK] to show the following settings.
Dolby D/Dolby D +/Dolby TrueHD
Select the audio signal to output.
≥Select “PCM”, when the connected equipment cannot decode the respective audio format.
≥Not making the proper settings may result in noise.
Select whether to mix or not mix the primary audio and secondary audio (including the button click sound). (> 20)
≥If “Off” is selected, the unit outputs the primary audio only.
Digital Audio Input
Select whether to receive the digital sound as PCM or the original sound format.
Select “On” if the sound is cut off intermittently.
Downmix
Select the downmix system to enjoy
≥Select "Surround encoded" to enjoy the surround sound.
≥There is no downmix effect on the bitstream audio signal.
≥The audio will be output in “Stereo” in the following cases.
–AVCHD playback
–Playback of secondary audio (including the button click sound).
High Clarity Sound
When connected to TV via HDMI AV OUT terminal for outputting image, it produces clearer sound because the analog video circuit (via VIDEO OUT terminal) can be stopped.
≥Set to “Enable” and then set “High Clarity Sound” on the playback menu to “On”. (> 28)
Audio Delay
Speaker
Refer to page 31
Display
Status Messages
Choose whether to show status messages automatically.
Choose the language for these menus and
Screen Saver Function
This is to prevent
≥When this is set to “On”:
If there is no operation for 5 minutes or more, the displayed screen switches to the other states automatically.
FL Display
Changes the brightness of the unit’s display.
≥If “Auto” is selected, the display is dimmed but brightens when you perform some operations.
VQT2T10
FL Control (Vol 0)
≥If “On” is selected, the unit’s display will turn off when the volume is adjusted to “0”.
License
Information about the software used by this unit is displayed.
TV / Device Connection
TV Aspect
Set to match the type of television connected.
When connected to a 4:3 aspect television and playing 16:9 ratio image:
4:3 | The sides are cut off so the |
| picture fills the screen. |
When playing
4:3 Letterbox Black bands appear at the top and bottom of the picture.
When connected to a 16:9 widescreen television and playing 4:3 ratio image:
16:9 | Video is displayed as a 4:3 ratio image in the |
| center of the screen. |
HDMI Connection
Press [OK] to show the following settings.
HDMI Resolution
The items supported by the connected devices are indicated on the screen as “¢”. When any item without “¢” is selected, the images may be distorted.
≥If “Auto” is selected, automatically selects the output resolution best suited to the connected television.
≥To enjoy high definition video
24p Output
When this unit is connected to a TV supporting 1080/24p output using an HDMI cable, movies and other material recorded at 24p are output at 24p.
≥When playing
≥When
HDMI Color Mode
This setting is for selecting
HDMI Audio Output
This setting selects whether or not to output audio from HDMI.Audio will be output through the system's speakers when "Off" is selected.
30