Panasonic VQT2T10, SC-BT228 Enjoying TV with unit’s speakers, Surround sound effects, Sound modes

Enjoying TV with unit’s speakers

Preparation

Turn on your TV and select the appropriate audio input mode [AUX, ARC, D-IN 1 or D-IN 2] to suit the connections to this unit. (> 17)

Surround sound effects

You can enhance stereo sources with surround sound effect.

1 Press [SURROUND] several times to select the effect.

2 While “MANUAL” is displayed on the unit’s display

Press [2, 1] and select the desired effect.

Surround modes to enjoy TV audio or stereo sources from all speakers:

≥DOLBY PL II MOVIE

≥DOLBY PL II MUSIC

≥S.SURROUND

≥Cinema Surround (> 15)

For more detailed information on this operation, please refer to the “Enjoying surround sound effects” section on page 18.

Making settings for digital audio input

Select to suit the type of audio from the DIGITAL AUDIO IN terminals on the main unit.

Press [EXT-IN] several times to select “D-IN 1” (DIGITAL IN 1) or “D-IN 2” (DIGITAL IN 2).

∫DIGITAL IN 1/DIGITAL IN 2

Press [AUDIO].

MAIN

SAP*

M+S* (stereo audio)

*“SAP” = Secondary Audio Program (Only works with Dolby Dual Mono)

≥“MAIN” or “SAP” is not available if “On” is selected in “Digital Audio Input”. (> 30)

∫DIGITAL IN 2

Press [STATUS].

CABLE/SAT AUDIO :

Select when an HDMI connected STB is selected on the TV, "D-IN 2" input is automatically selected.(> 24, “Setting the audio link with the STB”).

≥Audio that is input through the DIGITAL AUDIO IN or AUX terminals are not output from the HDMI AV OUT terminal.

Radio

TV

Sound modes

You can adjust the mode depending on the source or situation.

1 Press [SOUND] several times to select the mode.

2 While the selected mode is displayed on the unit’s display

Press [2, 1] and select the desired setting.

For more detailed information on this operation, please refer to the “Changing the sound modes” section on page 18.

VQT2T10

23