Sony KZ-32TS1, KZ 42TS1 manual Menu category Menu item Setting option

		Adjusting Your Setup
Menu category	Menu item	Setting option
	Screen Zoom	Select to enlarge the picture with the center position fixed (only when “Wide Mode” is set
		to “Full”). Select from “Standard” (normal size), “⋅2” (doubled), “⋅3” (tripled), or “⋅4”
		(quadrupled).
Screen
	Adjust Pixel	Select to adjust the picture from an RGB equipment.
Control		Auto Adjust: Select “OK” to make best possible adjustment for the input signal
		automatically. Note that it may not be adjusted perfectly depending on the
		input signal condition or picture pattern. In this case, perform “Auto Adjust”
		again.
		Dot Phase: Adjust between 00-63 when part of a displayed text or image is not clear.
		Total H Pixel (Total Horizontal Pixel): Adjust when the letter or picture is not clear as a
		whole.
		Reset: Reset to the factory settings.
	Display	Select “On” to display which input is selected.
	Screen Saver	Select to reduce image retention.
Custom Setup		Pic. Inversion (Picture Inversion)
		Invert tint of the picture (Example: white to black, black to white) to correct the screen.
		Off: Select to deactivate this function.
		Auto: Select to activate this function at the specified time everyday
		On: Select to activate this function. It keeps working until you select “Off.”
		Pic. Orbit (Picture Orbit)
		Move the picture position to reduce image retention.
		Orbit: Select “On” to move the position. If you select “On,” set “Orbit Range” and
		“Orbit Cycle.”
		Orbit Range: Select the moving range from “Large,” “Mid” (Middle), and “Small.”
		Orbit Cycle: Select the moving time from “10sec,” “30sec,” “1min,” and “5min.”
	Color Matrix	Select to give the picture a neutral tint, if the output signal from the DVD player
		connected to the COMPONENT VIDEO IN jacks is 525p (480p), 1125i (1080i), or 750p
		(720p) signal format. Adjust this only when the picture tint goes out of tune. Select the
		signal format for each input, then set it to “Y/Cb/Cr,” or “Y/Pb/Pr.” When purchasing, all
		formats are set to “Y/Pb/Pr.”
	RGB Mode	Select if an equipment which outputs the RGB signal is connected to the Y/G, PB/B, PR/R
		jacks of the COMPONENT VIDEO IN 2/RGB IN jacks.
		DTV: Select when a digital tuner with RGB signal is connected.
		Others: Select when other RGB equipment is connected.
	Sync Mode	Set according to the input signal from the HD jack of the COMPONENT VIDEO IN 2/
		RGB IN jacks.
		H/Comp: Select when the input signal is a horizontal synchronized signal or a composite
		signal.
		Video: Select when the input signal is a video signal.

US

(Continued)

(US) 49