14 (US)
Installing and Connecting the TV
Connecting a Digital TV Receiver
Notes
•You cannot record the signal from any equipment connected into the Y, PB and PR
connectors.
•This TV is not compatible with digital TV receivers configured with RGB or VGA output
connectors.
Disconnect all power sources before making any connections.
1Using three separate component video cables, connect the Digital TV
Set-top box’s Y, PB and PR jacks to the TV.
Notes
•The Y, PB and PR jacks do not provide audio, so audio cables must be connected to provide
sound.
•Component video (Y, PB, PR) connection is necessary to view 480i, 720p, and 1080i
formats. Note that this TV displays all format types of picture in a resolution of 852 dots ×
1024 lines (KZ-32TS1), or 1024 × 1024 (KZ-42TS1).
2Using an AUDIO cable, connect the Digital TV Set-top box’s Audio
OUT jacks to the TV’s AUDIO IN jacks.
HD VD
IN
OUT
PB/BY/G PR/R
LR
AUDIO
LR
VHF/UHF
AC IN
AUDIO OUT
COMPONENT VIDEO IN 2
/
RGB IN
SUB
WOOFER
CONTROL
S
VIDEO
LR
AUDIO
PBYPR
LR
AUDIO
S VIDEO
VIDEO IN 1 COMPONENT VIDEO IN 1
VIDEO IN 2
VMC-10HG (not supplied)
AUDIO-L (white)
AUDIO-R (red)
Digital TV Set-top box
RK-74A (not supplied)
Rear of TV
PR
PB
Y