92 Installing StorNext Client Software
Installing StorNext Client Software on SuSE Linux
Use this procedure to install StorNe xt software on a SuSE Linux client.
1Log on as root.
2Install the client software. Type:
tar xf <filename>
rpm -ivh <client package name>
Where <filename> is the name of the client installation prog ram.
3Enable the chkconfig levels to start automatically on reboot. Type:
chkconfig -s raw 235
chkconfig -s cvfs 345
4Make sure the /usr/cvfs/config/fsnameservers file contains the name of the server
machine.
5Create the mount points for the file systems. Type:
mkdir -p <mount point>
chmod 777 <mount point>
6Add the following line to the /etc/fstab file to enab le automount after reboot.
<file system name> <mount point> cvfs verbose=yes 0 0
where <file system name> is the name of the file system and <mount point> is the mount
point specified during the Add File System step of the StorNext software configuration. For more
information, refer to Step 2: Adding File Systems on page 28.
Note To manually mount a file system, type this command:
mount -t cvfs <file system name> <mount point>