Canon HFM46, HFM406 Capturing Photos, To select the photo capture settings, To capture the photos

•When you start capturing a video snapshot scene less than 1 second from the end of the scene, the video snapshot scene will be captured starting from the beginning of the following scene.

•During the playback of video snapshot scenes captured from a previ- ously recorded movie, you may notice some anomalies in the picture/ sound at the point where the playback switches to a new scene.

Capturing Photos

You can capture a single photo or a series of photos. The size of the captured photos will be 1920x1080 and it cannot be changed. Please read the IMPORTANT section before using an Eye-Fi card.

To select the photo capture settings

[MENU] 888[Photo Capture from Video] 8 [ASingle Photo] or [BPhoto Sequence] 8[a]

To capture the photos

1Play back the scene or story from which you want to capture the photo.

2 Pause the playback at the point you want to capture.

3Touch [PHOTO].

To capture a photo sequence, keep touching [PHOTO]. The scene will be played back frame-by-frame and each frame captured as a separate photo.

4 Touch [B] to stop the playback.

IMPORTANT

•When capturing photos on an Eye-Fi card in memory card slot Y, pho- tos will be uploaded automatically if you are within the range of a config- ured network. Always verify that Eye-Fi cards have been approved in the country/region of use. See also Using an Eye-Fi card (0133).

NOTES

•The data code of the photos will reflect the date and time of recording of the original scene.

Video Š 107