Sharp PN-T322B operation manual Binding Cables, Setting the USB flash drive cover, 11 E

Binding Cables

The cables connected to the terminals on the rear of the monitor can be fastened with the cable clamp.

Attach the cable clamp to the back of the monitor, and fasten the cables.

Cable

Cable clamp

Setting the USB flash drive cover

1.Insert the USB flash drive into the USB port.

USB port

Caution

2.Attach the USB flash drive cover and secure with the provided screw.

Insert the claw (1) into the monitor, and while pressing in the direction of (2), insert the claw (3) into the monitor.

(3)

Screw (3) (black)

(1)

USB flash drive cover (2)

•Do not touch any screws other than the black screw.

Danger of fire or electrical shock if a screw other than the black screw is removed.

TIPS

•If the USB flash drive will be attached, use a USB flash drive with dimensions no greater than 3-1/8 inch (80 mm) (L) × 15/16 inch (25 mm) (W) × 7/16 inch (12 mm) (H).

•To remove the USB flash drive cover, reverse the procedure. Using excessive force may break the claws. Exercise caution.

11 E