![](/images/new-backgrounds/1233196/23319661x1.webp)
Specifications
nProduct Specifications
Model |
|
| ||
LCD component |
|
| 32" Class | |
Max. resolution |
| (pixels) | 1366 x 768 | |
Max. colors |
|
| Approx. 16.77 million colors | |
Pixel pitch |
|
| 0.511 mm (H) × 0.511 mm (V) | |
Viewing angle |
|
| 176° right/left/up/down (contrast ratio ≥ 10) | |
Screen active area |
| inch (mm) | ||
Computer input signal |
| Digital (DVI 1.0 | ||
Sync signal |
|
| Horizontal/vertical separate (TTL: positive/negative), | |
|
|
|
| Composite sync (TTL: positive/negative) |
Video color system |
|
| NTSC (3.58MHz)/NTSC | |
Plug and play |
|
| VESA DDC2B | |
Power management |
|
| VESA DPMS, DVI DMPM | |
Input terminals |
| Digital |
| HDMI x 1 |
|
|
|
| |
|
| Analog |
| Mini |
|
| Composite video |
| RCA pin x 1 *1 |
|
| Component |
| RCA pin (Y, Cb/Pb, Cr/Pr) x 1 *2 |
|
| Audio |
| 3.5 mm mini stereo jack x 1 |
|
|
|
| RCA pin (L/R) x 1 *1 |
|
| Serial |
| |
|
| USB flash drive |
| x 1 (for slideshow) |
Output terminal |
| Audio |
| 3.5 mm mini stereo jack x 1 |
Speaker output |
|
|
| 8 W + 8 W |
Touch Panel |
| Detection method |
| Infrared camera method |
|
| Detection area | inch (mm) | 27 x 15 (685.7 x 380.3) |
|
| PC connector |
| USB (1.1 compliant) |
|
| Power supply |
| Supplied from USB |
|
| Position accuracy | inch (mm) | ±1/4 (±6) |
Power requirement |
|
|
| AC 100 V - 240 V, 50/60 Hz |
Operating temperature *3 |
| 41°F to 95°F (5°C to 35°C) | ||
Operating humidity |
|
| 20% to 80% (no condensation) | |
Power consumption |
|
| 82 W | |
(input signal waiting mode*4 / standby mode) | (0.9 W / 0.9 W) | |||
Dimensions (excluding protrusions) | inch (mm) | Approx. | ||
Weight |
| lbs. (kg) | Approx. 24.3 (11) |
*1 Uses the provided conversion cable (for AV video).
*2 Uses the provided conversion cable (for AV component).
*3 Temperature condition may change when using the display together with the optional equipments recommended by SHARP. In such cases, please check the temperature condition specified by the optional equipments.
*4
As a part of our policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement without prior notice. The performance specification figures indicated are nominal values of production units. There may be some deviations from these values in individual units.