Sharp PN-T322B operation manual 27 E, Controlling the Monitor with a PC RS-232C Others

Controlling the Monitor with a PC (RS-232C)

Others

	Function		Command	Direction	Parameter	Reply	Control/Response contents	*
SCREEN SIZE			WIDE	WR	1-5	1-5	1: WIDE, 2: NORMAL, 3: Dot by Dot, 4: ZOOM1, 5: ZOOM2
(DVI-D, D-SUB)
SCREEN SIZE			WIDE	WR	1-5	1-5	1: WIDE, 2: ZOOM1, 3: ZOOM2, 4: NORMAL, 5: Dot by Dot	No
(HDMI, COMPONENT, VIDEO)
VOLUME			VOLM	WR	0-31	0-31
MUTE			MUTE	WR	0-1	0-1	0: OFF, 1: ON
INFORMATION		MODEL	INF1	R		Value		Yes
		SERIAL NO	SRNO	R		Value
BRIGHT			VLMP	WR	0-31	0-31		No
TEMPERATURE SENSOR			DSTA	R		0	Internal temperature normal
						1	Internal temperature abnormal (Standby mode)
						2	Internal temperature abnormal (Temperature is normal now, but it was	Yes
							abnormal during operation.)
						3	Internal temperature abnormal (Brightness of the backlight decreases.)
						4	Temperature sensor abnormal
Temperature acquisition			ERRT	R		Value	Temperature at temperature sensors are returned in the following forms:
							[Sensor 1], [Sensor 2], [Sensor 3]
							This monitor does not have sensors 2 and 3. All return the same value as	No
							sensor 1.
							Indicates a temperature sensor abnormality when “126” is returned.
CAUSE OF LAST STANDBY MODE			STCA	W	0		Initialization
				R		0	No detectable error has occurred
						1	Standby mode by POWER button
						2	Main power off by the main power switch	Yes
						3	Standby mode by RS-232C
						4	Waiting mode by No Signal
						6	Standby mode by abnormal temperature

27 E