Canon HFM406 Selecting the Video Quality Recording Mode, Reviewing the Latest Scene Recorded

•Be sure to save your recordings regularly (0120), especially after making important recordings. Canon shall not be liable for any loss or corruption of data.

•Photos recorded on an Eye-Fi card in memory card slot Ywill be uploaded automatically after setting the camcorder to playback mode, if you are within the range of a configured network. Always verify that Eye- Fi cards have been approved in the country/region of use. See also Using an Eye-Fi card (0133).

NOTES

•The zoom, Quick Start function, power saving modes, etc. operate the

same way in mode as in mode. For details, refer to AUTO Mode (040).

•Photos cannot be recorded while the digital zoom is activated or while fading in or fading out a scene.

Reviewing the Latest Scene Recorded

You can review the last 4 seconds of the last scene recorded with the camcorder without switching to playback mode. While reviewing the latest scene, the picture will be played back without sound.

Operating modes:

1 Set the mode switch to y or .

2Review the last 4 seconds of the scene.

[FUNC.] 8[ Review Recording]

Selecting the Video Quality (Recording Mode)

The camcorder offers 5 recording modes. Changing the recording mode will change the recording time available on the memory. Select MXP or FXP mode for better movie quality; select LP mode for longer recording times. The following table gives approximate recording times.

Operating modes:

76 Š Video