Svenska | Nederlands | Italiano | Français | Español | Deutsch | Dansk |
English
INTRODUCING THE SOUNDDOCKTM DIGITAL MUSIC SYSTEM
Connecting to power
With the proper insert installed, you can now plug in the system.
1.Notice the arrow on top of the cable connector from the power pack (Figure 4).
2.Line up this arrow with the one on the back of the system as you insert the connector into the jack.
3.Insert the small connector end of the power cable into the jack on the power pack.
4.Plug the other end of this cable into a wall outlet.
Figure 4
Plugging in the system
Power
pack
Power
cable
To check for iPod compatibility
Figure 5
Software version for each iPod type
For the SoundDock™ system remote control to work as expected, your iPod must have the proper version (or later) of Apple software installed (Figure 5).
iPod models
Required version | 3.0 | 2.2 | 1.2 | 1.0 | 1.0 | 1.0 |
(or later) of |
Apple software
To check the software version your iPod is currently running, select Settings, About, Version on the iPod display.
If you need to upgrade, simply visit the Apple iPod website and follow the instructions there for a free download. Go to:
http://www.apple.com/ipod/download/
6
