English
Dansk | Deutsch | Español | Français | Italiano | Nederlands | Svenska |
INTRODUCING THE SOUNDDOCKTM DIGITAL MUSIC SYSTEM
Using the correct insert
Before you enjoy the sound, you need to install the proper insert in the dock on the front of the system. Then you can plug the system in.
To install the proper insert:
1. Check the bottom of each insert for the label that identifies it as A, B or C.
2. In the chart on the right, locate your iPod and the mark that indicates which insert it works with: A, B or C.
Note: Using the correct insert ensures the proper fit for your iPod.
3.Position the selected insert over the dock.
4. Press on both sides of the insert until it sits firmly in place (Figure 3).
Figure 3
Installing an insert
Note: You can remove and replace this insert with the other one that is provided. This allows you to use the system with iPods of different sizes. For details, see “To remove an insert from the dock” on page 9.
5
