English
Dansk | Deutsch | Español | Français | Italiano | Nederlands | Svenska |
EXPERIENCE THE SOUND
To remove an insert from the dock
1.With your thumbs on the front of the dock near the Bose® logo, and your index fingers inside it, pinch until the rear of the insert lifts up (Figure 8).
2.Lift out the insert and replace it with the one you need.
Figure 8
Removing an insert
Troubleshooting
Problem | What to do |
|
|
Your iPod does not dock | • Make sure the dock insert is the proper fit for your iPod |
properly | (refer to “Using the correct insert” on page 5). |
| • Remove your iPod from the dock and check for obstructions on the connectors |
| in the dock and on your iPod. Then reseat it in the dock. |
|
|
No sound | • Make sure the system is plugged in, your iPod is turned on, and a music track is |
| selected and playing. |
| • Press the Play/Pause button on the remote control. |
| • Increase the volume setting for the system. |
| • Remove your iPod from the dock, wait briefly, then reseat it. You may need to do |
| this a few times. |
| • Make sure your iPod is running compatible software |
| (refer to “To check for iPod compatibility” on page 6). |
|
|
No sound and your iPod | • Make sure the power cable is securely plugged into a functioning wall outlet and |
is not charging | the symbol on the small connector is matched to the one on the back of the |
| SoundDockTM system. Refer to Figure 4 on page 6. |
| • Make sure your iPod is firmly seated in the dock. |
|
|
9
