Operation with tape (Continued)
Copying from DVD to VCR
You can copy the contents of a DVD to a VHS tape.
1.Insert the disc you wish to copy into the DVD deck and close the disc tray.
2.Insert a blank VHS video tape into the VCR deck.
3.Find the place on the DVD from which you want to start dubbing using the PLAY, FWD, REW and PAUSE functions.
For best results, pause playback at the point from which you want to record.
4.Press the COPY button on the front panel or REC/OTR on the Remote Control. The DVD goes into PLAY mode and the VCR goes into RECORD mode. If the DVD disc menu appears, you may need to press PLAY (N) manually to begin copying.
5.When the DVD is finished playing, press STOP (x) to end copying.
Notes:
•If the DVD you are attempting to copy is copy protected, you will not be able to copy the disc. It is not permitted to copy Macrovision encoded DVDs (or Discs). “LOCK” is dis- played in the display window.
•You must stop the copy process manually when the DVD movie ends, or the unit may replay and record over and over again.
•When you stop the DVD playback during copying, the recording on VCR is stopped automatically.
•The unauthorized recording, use, distribution, or revision of television programs, videotapes, DVDs and other materi- als, is prohibited under the Copyright Laws of the United States and other countries, and may subject you to civil and/or criminal liability.
On-Screen Display - VCR
Some of these functions will be displayed every time the DVD+VCR is operated.
❶ ❷ | ❸ | ❹ ❺ | |||||||
|
|
|
|
|
|
|
|
|
|
|
| PLAY |
| CH 4 |
| ||||
|
| SP |
|
| STEREO |
|
| ||
|
|
|
|
| |||||
OCT 8 , SAT | 2:15 PM | |||
|
|
|
| |
❻ | ❼ | |||
|
| |||
❶ TAPE SPEED DISPLAY | ❺ STEREO/SAP DISPLAY | |||
❷ FUNCTION DISPLAY | (MONO is not displayed) | |||
|
| |||
❸ | ❻ DATE DISPLAY | |||
|
| |||
❹ CHANNEL DISPLAY | ❼ CLOCK/COUNT/REMAIN | |||
DISPLAY | ||||
|
| |||
|
|
|
| |
Each press of the ENTER changes the TV screen in the following sequence.
STOP | CH 4 |
SP | STEREO |
APR 30 , SAT | 2:15 PM |
|
|
2:15 PM
0:35:40
REM 1:58
Real-Time Counter
If a tape with contents recorded on it is inserted into the DVD+VCR, the
Press CLOCK/COUNTER to select the
2:15 AM | 0:05:25 | REM 1:07 |
CLOCK | COUNTER | REMAINING TIME |
Counter Memory
This feature is useful if there is a section of tape you want to view immediately after recording or if you want to return to the same point several times.
1.Begin recording or playing a tape.
2.Press CLOCK/COUNTER until the
3.At the point that you want to locate later, reset the real- time counter to “0:00:00” by pressing CLEAR.
4.Continue to play or record.
5.Press STOP (x) when recording or playback finishes.
6.Press REW (m). The tape automatically stops when the tape counter returns to about “0:00:00”.
Tape Remaining
This function displays the amount of time remaining on the tape during recording or playback. Press CLOCK/COUNTER repeatedly until the REM indicator displays on the TV screen during recording or playback. The remaining tape length may not be displayed correctly depending on the condition of the tape and the kind of the tape
Notes:
•The function displays can be seen displayed on the TV screen for 5 seconds.
•The clock (or tape counter, tape remaining) mode will be displayed until you press ENTER.
•The tape counter and the remaining tape length indicator appear only when a cassette is inserted. Also, the remain- ing tape length indicator appears after any tape operation.
OPERATION
27
