Warning
•When you are connecting (via the BITSTREAM/PCM jack) an AV decoder that does not have the Dolby Digital, Digital Theater Systems (DTS) or MPEG2 decoding function, be sure to set “Audio Out Select” to “PCM” from the
•When playing
MPEG2 sound
You can enjoy motion picture and live concert DVD video discs with dynamic realistic sound by connecting an amplifier equipped with an MPEG2 audio decoder or MPEG2 audio processor.
Amplifier equipped with an | AV IN AV OUT COMPONENT | S VIDEO | |
MPEG2 audio decoder | |||
VIDEO | BITSTREAM/PCM | ||
To digital audio input | To BITSTREAM/PCM |
| |
(optical/coaxial) |
|
Digital cable (supplied)
•Use DVD video discs encoded via the MPEG2 recording system.
•Make the following setting.
Select: | Page | ||
“Audio Out Select” | “Bitstream” | 44 | |
47 | |||
|
| ||
Recording system | MPEG | 39 |
Connections
2 channel digital stereo
You can enjoy the dynamic sound of 2 channel digital stereo by connecting an amplifier equipped with a digital audio input and speaker system (right and left front speakers).
Amplifier equipped with a | AV IN AV OUT COMPONENT | S VIDEO | |
digital audio input | |||
VIDEO | BITSTREAM/PCM | ||
To digital audio input | To BITSTREAM/PCM |
| |
(optical/coaxial) |
| ||
|
| ||
| Digital cable (supplied) |
|
Notes
• Make the following setting.
Select: | Page | ||
“Audio Out Select” | “PCM” | 44 | |
47 | |||
|
|
•DO NOT connect the BITSTREAM/PCM jack of the player to the
•Connect the BITSTREAM/PCM jack of the player to the “COAXIAL” input of a Receiver or Processor.
•Refer to the owner’s manual of the connected equipment as well.
•When you connect the player to other equipment, be sure to turn off the power and unplug all of the equipment from the wall outlet before making any connections.
•The output sound of the player has a wide dynamic range. Be sure to adjust the receiver’s volume to a moderate listening level. Otherwise, the speakers may be damaged by a sudden high volume sound.
•Turn off the amplifier before you connect or disconnect the player’s power cord. If you leave the amplifier power on, the speakers may be damaged.
59